• One heavy duty fixing per foot.

• Easily interchangeable if damaged.

• Reduces maintenance costs.

• Easy to assemble.

• No painting required as it's pre-coloured.

• Easy to clean.

Density ISO 1183

g/cm3

0.95

Yield stress DIN EN ISO 527

N/mm2

28

Elongation yield DIN EN ISO 527

%

+8

Length of breakage

%

300

Tensile E-modulus DIN EN ISO 527

MPa

850

Impact strength DIN EN ISO 179

KJ/m2

NO BREAK

Notched impact strength DIN EN ISO 179

KJ/m2

50

Ball identification hardness DIN EN ISO 2039-1

N/mm2

45

Shore hardness D ISO 868

shore

66

Linear expansion coefficient DIN 53753

K-1

1'8, 10(*4)

Thermal conductivity DIN 53752

W/m-K

0.38

Dielectric strength VDE 0303-21

KV/mm

44

Surface resistance DIN IEC 167

Ohm

10(*14)

Temperature range 

ºC

-100 until +80

Chemical resistance

-

High resistance to acid,alkali and solvent

Physiologically acceptable

-

Yes

Welding

-

Yes

Glassfibre reinforcing

-

-

Laquering, Printing

-

-

Hot forming

-

Possible

• Zero maintenance.

• Can be levelled.

• High density polymer.

• Without edges or corners.

• Resistant to corrosive environments.

• Does not rust.

• High impact resistance.

• High visibility due to its colour.

• Impact absorption thanks to its flexibility.

• Stops fungi or bacteria growth.

• One heavy duty fixing per foot.

• Easily interchangeable if damaged.

• Reduces maintenance costs.

• Easy to assemble.

• No painting required as its pre-coloured.

• Easy to clean.